|
Flammadur A107
|
Flammadur® A107
An inorganic, water-based, non-toxic, elastomeric sealant
Flammadur® A107 is a single component, non-toxic, inorganic, water-based, elastomeric, flexible firestop sealant used for penetrations through ceilings and floors.
(see attached UL systems summary or go to www.flammadur.com).
Features:
Flexible firestop sealant
Single component
For through penetrations, with up to F=3 hours
For construction joints, with up to F=3 hours, 2” gap
For use in large openings with rigid E473 seal for downsizing
For unique system with moving slab in a curtain wall, 3hr fire rating, 2” gap
Easy and safe to apply
Non-toxic, water-based
Smoke, fume resistant
Silicone-free
Solvent-free (water based, easy to clean)
Halogen-free, asbestos-free
Weather resistant
Excellent aging resistance
Good UV resistance
Uses:
It has been tested for mechanical pipes (metal or composites) and metal conduits in conjunction with mineral wool, and it can be used to seal construction gaps, expansion joints, control joints, and movable curtain wall gaps.Flammadur®A107 maintains the fire rating of walls and ceilings so that flames and smoke cannot pass through. A107 does not release any flammable, noxious or toxic fumes during installation and curing. It is UL® and Factory Mutual certified. Use Flammadur®E473 (rigid seal) to downsize the openings.
Industry Qualifications:
ASTM E814 (ANSI/UL 1479), Fire tests of Through-Penetration Firestops
UL C-S115, Standard Method of Fire Tests of Firestop Systems
ANSI/UL 2079, Tests for Fire Resistance in Building Joint Systems
Made in Germany
|
|
 |

Flammadur® A107 Caulk Spec-Data Sheet
Product Name
Flammadur ®A107 Caulk
Manufacturer
Flammadur materials were originally developed by AEG Insulier und Kunstoff, GmbH, Division of AEG (German General Electric). Present manufacturer AIK Flammadur Brandschutz GmbH, Kassel, Federal Republic of Germany, has licensed Fire Protection Technologies, Inc. to distribute Flammadur products in North America.
Product Description
Basic Use: Flammadur® A107 is a single component, non-toxic, water-based, flexible firestop sealant used for penetrations through ceilings and floors. It has been tested for mechanical pipes (metal or composites) and metal conduits in conjunction with mineral wool, and it can be used to seal construction gaps, expansion joints, control joints, and movable curtain wall gaps. Flammadur®A107 maintains the fire rating of walls and ceilings so that flames and smoke cannot pass through. A107 does not release any flammable, noxious or toxic fumes during installation and curing. It is UL® and Factory Mutual certified. Use Flammadur®E473 (rigid seal) to downsize the openings.
Composition and Materials: Flammadur® A107 is an inorganic, water-based, non-toxic, elastomeric sealant.
Copyright © 2008 Fire Protection Technologies, Inc. All rights reserved
|